Zinc Rich Epoxy Primer EP-ZR-10

Product Scope

Buxly Zinc Rich Epoxy Primer adheres perfectly to provide a continuous film of zinc metal to iron or steel surfaces and provides a matt finish which offers rust prevention on the surfaces.

Product Application

Buxly Zinc Rich Epoxy Primer can be applied on the job to provide zinc cathodic protection, where usual methods of galvanizing are not applicable, such as transmission towers, television towers, machine installations, air conditioning ducts, metal roofs and refrigeration equipment etc.

Technical Information

Type Two Pack
Composition Refined zinc dust pigment, inert extenders, special additives in epoxy resin cured with polyamide hardener
Mixing Ratio Component A : 4 Parts by volume
Component B : 1 Parts by volume
Pot Life of Mixed Paint 3 to 4 Hours at 25° C
Application Brush/Roller/Spray
Drying Time a) Surface Dry : Within 1 Hour
b) Tack Free : 6 – 8 Hours
c) Hard Dry : 18-24 Hours
d) Over-coating : Six days max
Complete Curing of Film 96 Hours to obtain completely cured system
Theoretical Spreading Rate 9–10 m2 per liter
Dry Film Thickness 72 + 2 microns
No. of Coats 1 Coat
Finish Egg Shell to Matt
Volume Solids When Mixed 50 + 2 %
Top Coat Buxly’s High Build Epoxy Finishing EP-F-10
Packing 4 Liters pack size
Storage Stability Six months, when stored properly in original sealed container at 15 to 35° C

Buxly Paints Limited

Commitment to Excellence in Quality

Data Sheet Get Quote