Plastic Bound Distemper (PBD)

Product Scope

Plastic Bound Distemper (PBD) is a top quality smooth distemper that can be used on walls, ceilings, old and new cement, concrete plaster, chipboards and hardboards.

Product Application

It can be thinned down with equal volume of water for application. Add a little more water in final coat to achieve optimum results and durability.

Packaging

Available in 14.56 liters, 6 and 30 kg pack sizes.

Technical Information

Type Water Based Air Drying
Viscosity by STORMER Viscometer @25° C 102–108 KU (Paint 90 : Water 10) parts by weight
pH 8.5–9.0
Finish Matt
Color Assorted Colors
Application Brush/Roller
Thinning Ratio for Application (Paint 1 : Water 1) by volume (Depending upon the absorbency of the substrate)
Recommended no. of Coats 3–4 Coats
Surface Dry 1 Hour
Recoating 2 Hours
Covering 11–15m² per Liter per coat (depending upon the absorbency of the substrate)
Shelf Life 18 months, if kept properly sealed within normal temperature

Buxly Paints Limited

Commitment to Excellence in Quality

Data Sheet Get Quote