Inorganic Zinc Silicate Primer

Product Scope

Buxly Inorganic Zinc Silicate Primer is an excellent anticorrosive primer. It has been formulated for structures exposed to aggressive climatic conditions. It is also used as pre-fabrication primer and is compatible with both single and two component finishing paints.

Product Application

Buxly Inorganic Zinc Silicate can be applied on marine structures, storage tanks and steel structures of plants such as refineries, thermal power plants, pipelines etc.

Technical Information

Type Two Component
Composition Inorganic zinc, silicate, solvents, additives
Drying Time a) Surface Dry : 15 – 30 Minutes
b) Over Coating : Minimum 6 – 8 Hours
Mixing Ratio Component A : 4.18 Part by volume
Component B : 0.82 Part by volume
Pot Life 24–26 Hours @ 30–35°C
Color Grey
Finish Matt
Application Airless spray, after thinning with conventional spray.
Spreading Rate 4–5 m2 per liter
Dry Film Thickness 75 + 5 Microns
Heat Resistance 300O C Dry Heat. Peak temperature 400OC
Packing 1 and 4 Liters pack sizes
Storage Stability Three months when stored properly in original sealed container at 15 to 35°C

Buxly Paints Limited

Commitment to Excellence in Quality

Data Sheet Get Quote