Buxly Hammeron Hammer Finish is durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. The decorative hammered appearance is smooth to the touch and sheds water well.
Hammeron Hammer Finish does not need a primer or undercoat. It can be directly applied to metals, iron surfaces, fences, specific plastics and wooden structures.
|Composition||Resins, Pigments, Aluminum paste|
|Drying Time||a) Surface Dry : Within 30 Minutes
b) Tack Free : 2 – 3 Hours
c) Recoat : 6 – 8 Hours
|Average Spreading Rate||6–9 m2 per liter per coat|
|Coat Recommended||2 Coats|
|Finish & Gloss||Regular Hammer effect, semi glossy to glossy finish|
|Flexibility||Flexible over 9mm mandrel|
|Weather Resistance||Good, resists more than 1000 hours when tested as a system according to BS.3900|
|Number of Coats||One coat, if required second coat can be applied|
|Thinner||Buxly’s Thinner for Mixing|
|Packing||0.91 and 3.64 Liters pack sizes|
|Storage Stability||One year when stored properly in original sealed containers at 15 to 35° C|