A/D Insulating Varnish

Product Scope

Buxly Air Drying Insulating Varnish Clear is a synthetic resin based air drying impregnating varnish which air dries in 03~05 hours and hard dries in 24 hours. A force drying at 80°C for 2~3 Hours will accelerate the curing process and thus will enhance the electrical insulation properties. The resulting film of Buxly Air Drying Insulating Varnish is clear, tough, water and oil resistant. It is an ideal insulation solution for small electrical windings and coils. It has good penetration power and can be used by both hot as well as cold dip processes.

Product Application

Air Drying Insulating Varnish is designed on specialized synthetic resin blended with selective additives which impart its excellent insulation properties coupled with moisture and oil resistance. If it is required to be thinned prior to application, it must only be done with Buxly Mixing Thinner.

Technical Information

Type of Product Single Pack – Air Drying
Color Straw
Pack Viscosity 90–100 Sec @ 30° C @ F4 Cup
Specific Gravity 0.84–0.93
Grind Clear
Flash Point >30° C
Surface Dry Time 03–05 Hours
Hard Dry Time 24 Hours
Electrical Strength Curing 800 Volts/Thou @ 20° C after 7-Days of curing
600 Volts/Thou @ 90° C after 7-Days of curing

Application Information

Application Method Cold/Hot Dip
Application Viscosity As per requirement of substrate
Solvent/Cleaner Buxly’s Mixing Thinner
Flash-Off Time 15 Minutes–01 Hour
Force Drying Temperature 80–110O C @ 2-3 Hours

Buxly Paints Limited

Commitment to Excellence in Quality

Data Sheet Get Quote