Epoxy Primer EP-R-10

Product Scope

Buxly Epoxy Primer EP-R-10 is an anticorrosive composition for painting of steel structures. It is a two component system, consisting of Component A and Hardener.

Product Application

EP-R-10 is primarily a protective coat against severe atmospheric conditions and requires finishing coats which suit the environmental conditions. This can also be used as a shop primer which protects the steel structure for a longer time.

Technical Information

Type Two Pack
Composition Corrosion resistant and inhibitive pigments with selected extenders in epoxy resin binder, cured with polyamide hardener
Mixing Ratio Component A : 2 Parts by volume
Component B : 1 Part by volume
Pot Life of Mixed Paint 3 to 4 Hours at 25°C
Application Brush/Roller/Spray
Drying Time a) Surface Dry : 2 – 3 Hours
b) Tack Free : 6 – 8 Hours
c) Recoat : 18-24 Hours
d) Over coating : Six days max
Complete Curing of Film It takes approximately 96 hours to obtain completely cured system. However we recommend, for safety purposes, a period of six days maximum, for over Coating of this primer
Average Spreading Rate 8–11 m2 per Liter
Dry Film Thickness 25 + 5 microns
No. of Coats 1–2 Coats
Finish Smooth, Eggshell to Matt
Volume Solids when Mixed 45 + 2 %
Top Coat Buxly’s High Build Epoxy Finishing EP-F-10
Packing 4 Liters pack size
Storage Stability Six months, when stored properly in original sealed container at 15 to 35°C

Buxly Paints Limited

Commitment to Excellence in Quality

Data Sheet Get Quote