Acrylic Stoving Verni Grey

Product Scope

Buxly Stoving Acrylic Verni Grey is designed for the difficult substrates where adhesion and corrosion resistance are primary requirements. It imparts an excellent metallic grey silver finish to the substrate and is resistant to weathering, corrosion, chipping, scratching and gasoline.

Product Application

Buxly Stoving Acrylic Verni Grey is a blend of special acrylic resins incorporated with premium quality metallic pigments.

Technical Information

Type of Product Single Pack–Stoving
Specific Gravity 0.94–1.04
Grind 6 BF
Pack Viscosity 60–70 Seconds @ F-4 Cup @ 30O C
Color Metallic Grey Silver
Stoving Schedule 140 ± 5° C @ 29–31 Minutes (PMT)
Flash Point 23° C
Finish Full Gloss (Full System)
Cross Hatch 97/100–100/100
Gasoline Resistance (After 3 hours of baking) 7 Hours (Full System)
Pencil Hardness Passes H Grade (Full System)
Salt Spray Test 96 Hours (Full System)
Flexibility Passes Conical Mandrel (Full System)
MEK Test Passes 10 Rubs (Full System)

Application Information

Application Method Conventional, Pressure Feed, Electrostatic Spray
Spray Viscosity 18–20 Sec @ F-4 @ 25° C
Solvent/Cleaner Buxly’s Stoving Thinner
Number of Coats 2 Coats
Dry Film Thickness 30–35 μm
Inter-Coat Time 05–10 Minutes (depending on booth temperature)
Flash-Off Time 10–15 Minutes (depending on booth temperature)
Recommended Booth Conditions Temperature: 25–30° C Relative Humidity: 55–70 %

Buxly Paints Limited

Commitment to Excellence in Quality

Data Sheet Get Quote